24 × 7 الخدمة عبر الإنترنت : +8613950095727

#البريد الإلكتروني
  • شارك :

  • in
  • https://www.facebook.com/profile.php?id=100031871989158
  • g
  • y
  • t
منتجات
الاقسام

PPS طويلة ألياف الكربون النتوء صب سعر المصنع

pps ألياف كربون طويلة حقن و بثق

  • رقم الصنف.:

    PPS-NA-LCF
  • دفع:

    T/T,PAYPAL
  • أصل المنتج:

    Xiamen Fujian
  • اللون:

    Natural
  • ميناء الشحن:

    xiamen port
  • المهلة:

    1-15
التحقيق الآن
تفاصيل المنتج

معلومات المنتج

PPS ألياف الكربون هي ألياف عالية القوة ومعاملية محتوى الكربون أعلى 90@. مرتفع تحتل مقاومة درجات الحرارة المرتبة الأولى بين جميع الكيماويات ألياف. أكريليك الألياف وألياف الفسكوز كمواد خام ، من خلال الأكسدة في درجات الحرارة العالية والكربنة.


عزز ألياف الكربون المركبات. أ ألياف الكربون هي نوع واحد فقط من الألياف ، و أنت لا يمكن صنع مكونات منه. لذلك ، ألياف الكربون و PPS راتنج مصنوع من مادة مركبة مستعمل.حسب تنوع وحالة ألياف الكربون ، وخصائص CFRP مصنوعة أيضًا مختلفة جدًا. هناك 4 ركائز وسيطة رئيسية وحدها طرق التشكيل الرئيسية المقابلة لـ هذه الركائز الوسيطة ومواد التشكيل مختلفة أيضًا

اسم المنتج

PPS طويلة ألياف الكربون النتوء صب سعر المصنع

اللون

طبيعي & أبيض & blasck & مناقشة
مواد

PPS lon ز الألياف الزجاجية

التعبئة 25 كجم / حقيبة
وقت التوصيل 3-15 أيام
ميناء شيامن فوجيان أو مناقشة

PPS long carbon fiber modified

ميزة المنتج

1.A طريقة أقل تكلفة فعالة لتحسين الأداء الميكانيكي
2.Low تكلفة البوليمر بالحرارة

3.يمكن يمكن استخدامها لأي تقوية البوليمر بالحرارة

4.الأفضل الأداء في التدفق مواد حقن صب

عملية المنتج

حقن قولبة: طريقة لإنتاج قولبة لمنتج صناعي عادة ما يتم تشكيلها باستخدام حقن المطاط والبلاستيك قولبة. حقن يمكن أيضًا تقسيم القوالب إلى قولبة بالحقن والقوالب - الصب طريقة الحقن آلة قولبة (يشار إليها بآلة حقن أو قولبة بالحقن آلة) هي المواد اللدائنية بالحرارة أو المواد المصلدة بالحرارة باستخدام قالب صب البلاستيك في أشكال مختلفة من المنتجات البلاستيكية لمعدات التشكيل الرئيسية ، صب الحقن من خلال آلة التشكيل بالحقن والعفن لتحقيق

تطبيق المنتج

pps LCf40 plastic injection part

شكرا على الخاص بك يزور

تعاقدني : ل ucy

ج ontra البريد الإلكتروني cts : sale04@lfrtplastic.com

العقود wechat / whats التطبيق / سكايب: +86 135 5947 4625

الويب : www.lft-g.com

ارسل رسالة

إذا كان لديك أي مشكلة عند استخدام الموقع أو منتجاتنا ، يرجى كتابة تعليقاتك أو اقتراحاتك ، وسوف نقوم بالرد على أسئلتك في أقرب وقت ممكن! شكرا لك على اهتمامك!

إذا كان لديك أسئلة أو اقتراحات ، فالرجاء ترك لنا رسالة ، وسوف نقوم بالرد عليك في أقرب وقت ممكن!

منتجات ذات صله
راتنج نقطة في الثانية مع ألياف الكربون طويلة
ألياف الكربون المقوى طويلة بولي (كبريتيد الفينيلين) نقطة في الثانية
ألياف الكربون المقوى طويلة بولي (كبريتيد الفينيلين) نقطة في الثانية تم تحضيره من خلال تشريب و ذوبان ألياف الكربون الطويلة مع poly (sylide sylide).
الراتنج من مادة البولي بروبيلين pps إضافة ألياف الكربون
بولي (كبريتيد الفينيلين) نقطة في الثانية صلابة ألياف الكربون طويلة
ألياف الكربون عززت طويلة (كبريتيد الفينيلين) نقطة في الثانية تم تحضيره من خلال تشريب و ذوبان ألياف الكربون الطويلة مع poly (sylide sylide).
الصين oem الكربون ملء pps حقن القالب pps الراتنج السعر إعادة تدوير حبيبات المورد
الكربون ملء pps حقن القالب pps الراتنج السعر إعادة تدوير حبيبات
الكربون ملء pps حقن القالب pps الراتنج السعر إعادة تدوير حبيبات أي واحد مصنوع في مصنع بنفسي.إنتاج رخيص جدا وجودة عالية جدا.
Polyphenyl sulfide pps filled 30% LCF flame retardant grade UL-94 heat resistance
Polyphenylene sulfide is a new functional engineering plastic.
LFT PPS Long Carbon Fiber compoosite material reinforced plastic lcf high toughness for cars
PPS-LCF materials Polyphenylene sulfide (PPS) is a linear semi-crystalline polymer with benzene ring and sulfur atoms composed of molecular main chain, its melting point is about 280℃, and has many excellent characteristics, with a series of excellent properties, such as excellent mechanical properties, chemical stability, solvent resistance, flame retardant, and has good processing and molding properties. As a kind of special engineering plastic with the largest output at present, the market application foundation is mature. In addition, in the molding process, pultrusion molding, injection molding, molding and other methods can be processed. By reinforcing PPS resin with carbon fiber, excellent mechanical properties and heat resistance composites can be prepared. At present, PPS fiber reinforced composites have been widely used in the aerospace field. Tencate Company of the United States uses PPS resin of Fortron brand of Ticona company of Germany to produce carbon fiber /PPS composites based on fabric hot pressing molding method. The material is used in Airbus A340 and A380 aircraft wing main edge, A340 aircraft aileron structure, Fokker50 aircraft landing gear door stress rib and girder, G650 business aircraft tail, rudder and elevator components. Advantages Performance characteristics: ◊ receiving aerospace OEM specifications and receiving certification; ◊ excellent cost performance; ◊ Working temperature exceeding Tg according to the design requirements on parts; ◊ laminates can protect against lightning strike and electrochemical corrosion. ◊ inherent flame retardant ◊ excellent chemical stability and solvent resistance; ◊ Long-term storage at ambient temperature. Main applications: ◊ Major and minor aircraft structures: ◊ wing leading edge, engine tower, body splint structure, etc. ◊ aircraft interior structure: ◊ seat structure parts, trunk, etc ◊ On specific requirements on corrosion resistance, dimensional stability, and shock absorption on high-end industrial areas Application Production process Our team and customers Come and contact us!
LFT-G PPS Polyphenylene sulfide composite long carbon fiber thermoplastic resin original color 12mm
PPS Special engineering plastics are engineering plastics with higher overall performance and long-term use temperature above 150℃, PPS is one of them. The carbon fiber reinforced special engineering composites formed by carbon fiber as the reinforcement and these special engineering plastics as the matrix have excellent mechanical properties, wear resistance and high temperature resistance, which can be used in aerospace, marine or medical fields, and in some aspects show more desirable application advantages than thermosetting resins or even metal materials. PPS-LCF Polyphenylene sulfide PPS resin strength and hardness are relatively high, good mechanical properties, adapt to a variety of molding and processing methods, you can achieve secondary precision molding, the dimensional stability of the product is better. Its moisture absorption rate of only 0.03%, low density, melt temperature Tm of 285 ℃, the glass transition temperature Tg of 90 ℃, thermal stability is very good, in the air state, to reach 430 ℃ -460 ℃ before decomposition, high flame retardant grade, 200 ℃ insoluble in most organic solvents, excellent electrical insulation. As a special engineering plastics, PPS advantages are outstanding, but defects also exist, for example, because of the large number of benzene ring to make its impact resistance and elongation is not good enough, but through the carbon fiber reinforced way, can further improve the performance of the material strength and thermal stability, so as to better show the value of the application of the material. Through the carbon fiber reinforced intervention, changing the original insulating properties of PPS into a conductive, anti-static properties, polyphenylene sulfide PPS toughness and strength can be substantially increased and improved, becoming one of the most commonly used composite materials in the aerospace field. It is used in aircraft landing gear, wings, hatches, fuel tank port covers, J-shaped nose cone, cabin interior trim and other components, not only to help increase the impact resistance, high temperature and corrosion resistance of these parts, more through the reduction in mass, to enhance the aircraft load efficiency and reduce fuel consumption. Compared with metal, this composite material has the advantages of low cost and easy processing, the cost can be reduced by 20-50 percent. High bonding must be maintained between the carbon fiber reinforcement and the PPS resin matrix. When the product is subjected to stress, this high bonding helps the interface to transfer the external load to the fibers effectively, which can effectively prevent cracks from debonding between the interfaces, in addition to enhancing the mechanical properties of the composite. To make the resin matrix and carbon fiber reinforcement between the formation of high bonding, we must make the molten state of PPS resin and carbon fiber reinforcement in full contact, full impregnation, so that the fiber body in the case of uniform dispersion to achieve good impregnation effect. Production process Application of PPS-LCF Xiamen LFT composite plastic Co., Ltd We will offer you: 1. LFT & LFRT material technical parameters and leading edge design 2. Mold front design and recommendations 3. Provide technical support such as injection molding and extrusion molding. About us
 PBT .مواد معدلة مع الملكية المعززة للألياف الزجاجية الطويلة
تنافسية PBT مواد الألياف الزجاجية المعدلة
PBT .عذراء البلاستيك الخام المواد ملء الألياف الزجاجية الطويلة
النشرة الإخبارية

-- الحصول على التحديثات مع أحدث المواضيع

حقوق النشر © 2015-2023 Xiamen LFT composite plastic Co.,ltd..كل الحقوق محفوظة.

الصفحة الرئيسية

منتجات

 أخبار

اتصل