Xiamen LFT MXD6 ملء الألياف الزجاجية الطويلة 30 عالية المتانة حقن صب سعر جيد

MXD6

Polyadipyl-m-benzoylamine, abbreviated as mxd6, resin has higher mechanical strength and modulus than other engineering plastics, is also a special high barrier nylon material. Although the barrier of mxd6 is slightly worse than that of pvdc and evoh, its barrier is not affected by temperature and humidity, which is especially suitable for high temperature and humid occasions. In today's barrier packaging and plastic instead of steel general trend, nylon mxd6 has become one of the most eye-catching new plastic varieties.

Structure performance: MXD6 nylon material has high strength, high rigidity, high thermal deformation temperature, small thermal expansion coefficient; Dimensional stability, low water absorption rate and small size change after water absorption, mechanical strength changes less; Forming shrinkage is small, suitable for precision forming processing; Excellent coating performance, especially suitable for high temperature surface coating; Excellent barrier to oxygen, carbon dioxide and other gases. Excellent mechanical and thermal properties and high strength, high modulus and heat resistance, high barrier, excellent cooking resistance.

MXD6-LGF

MXD6 can be compounded with glass fiber for use in fiberglass reinforced materials containing 50-60% glass fiber for exceptional strength and stiffness.

Even when filled with high glass content, its smooth, resin-rich surface produces a fibre-free high gloss surface, ideal for painting, metal-plating, or creating naturally reflective shells.

1, suitable for high liquidity of thin wall
It is a very fluid resin that can easily fill thin walls as thin as 0.5 mm thick even when the glass fiber content is as high as 60%.

2. Excellent surface finish
A resin-rich perfect surface has a highly polished appearance, even with a high glass fiber content.

3. High strength and stiffness
The tensile and flexural strength of MXD6 is similar to that of many cast metals and alloys with the addition of 50-60% glass fiber reinforced material.

4, good dimensional stability
At ambient temperatures, the linear expansion coefficient (CLTE) of MXD6 glass fiber composites is similar to that of many cast metals and alloys. Strong reproducibility due to low shrinkage and the ability to maintain tight tolerances (length tolerances as low as ± 0.05% if properly formed).

MXD6 replaces metal to produce high-quality structural parts for automobiles, electronics and electrical appliances

In automobile parts, many occasions require material products with high mechanical strength and good oil resistance, and can be used in the range of 120 ~ 160℃ for a long time. Glass fiber reinforced MXD6 heat resistant temperature up to 225℃, high rate of strength retention at high temperature, can be used in the cylinder block, cylinder head, piston, synchronous gear, etc. MXD6/PPO alloy has high temperature resistance, high strength, oil resistance, wear resistance, good dimensional stability and other properties, can be used for the vertical outer plate of the automobile body, front and rear fenders, wheel covers and almost can not use steel plate stamping forming curved parts and automobile chassis.

Datasheet for reference

Application fileds

Production process

Xiamen LFT composite plastic Co., Ltd

س: كيف يتم اختيار محتوى الألياف للمنتج؟ هل المنتج الأكبر مناسب لمواد ذات محتوى ألياف أعلى؟

ج: هذا ليس مطلقا. محتوى الألياف الزجاجية ليس أكثر هو الأفضل. المحتوى المناسب هو فقط لتلبية متطلبات كل منتج.

س: في أي ظروف يمكن أن تحل الألياف الطويلة محل الألياف القصيرة؟ ما هي المواد البديلة الشائعة؟

يمكن استبدال مواد الألياف الأساسية التقليدية بألياف زجاجية طويلة ومواد LFT طويلة من ألياف الكربون في حالة العملاء الذين لا يمكن تلبية خواصهم الميكانيكية أو عندما تكون البدائل المعدنية الأعلى مطلوبة. على سبيل المثال ، غالبًا ما تحل الألياف الزجاجية الطويلة PP محل الألياف الزجاجية المقواة بالنايلون ، والألياف الزجاجية الطويلة من النايلون تحل محل سلسلة PPS.

س: هل للألياف الزجاجية الطويلة وحقن ألياف الكربون الطويلة متطلبات خاصة لآلات التشكيل بالحقن والقوالب؟

ج: هناك بالتأكيد متطلبات. خاصةً من هيكل تصميم المنتج ، وكذلك فوهة اللولب لآلة التشكيل بالحقن وعملية التشكيل بالحقن لهيكل القالب يجب أن تأخذ في الاعتبار متطلبات الألياف الطويلة.