LFT-G ABS أكريلونيتريل بوتادين ستايرين يملأ ألياف زجاجية طويلة عالية الأداء للاستخدام الصناعي

ABS

---

ABS resin is a thermoplastic polymeric structural material with high strength, good toughness and easy processing and molding.

Long glass fiber reinforced ABS granules

---

Long glass fiber reinforced plastic is based on the original pure plastic, adding long glass fiber and other additives, so as to improve the scope of use of the material. Generally speaking, most of the long glass fiber reinforced materials are mostly used in the structural parts of products, which is a structural engineering material, such as PP, ABS, PA66, PA6, PBT, PPS, etc.

Advantages

After long glass fiber reinforced,  long glass fiber is a high temperature resistant material, therefore, the heat resistance temperature of reinforced plastics is much higher than before without long glass fiber.

After long glass fiber reinforced, the addition of long glass fiber restricts the movement of polymer chains between plastics, so the shrinkage of reinforced plastics is much lower and the rigidity is much higher.

After long glass fiber reinforcement, the reinforced plastic will not be stress cracked, and the impact resistance of the plastic will be improved.

After long glass fiber reinforcement, long glass fiber is a high-strength material, which also greatly improves the strength of plastic, such as: tensile strength, compression strength, bending strength, much higher.

After the long glass fiber reinforcement, the burning performance of the reinforced plastic decreases a lot due to the addition of long glass fiber and other additives, and most of the materials cannot be ignited, which is a kind of flame retardant material.

Datasheet for reference

---

Application

---

Can be used at many fields.

For more details, please contact us.

Other products you may wonder

---

                                                                                                                                                             

                PP-NA-LGF                              PA6-NA-LGF                           TPU-NA-LGF                    

Frequently asked questions

---

Q. What are the differences and advantages of long fiber materials and thermosets and staple fibers?

A. Compared with the short fiber, it has more excellent performance in mechanical properties. It is more suitable for large products and structural parts. It has 1-3 times higher toughness than short fiber, and the tensile strength (strength and rigidity) is increased by 0.5-1 times. Compared with thermosets, it is more environmentally friendly. It can be recycled and reused,  and has simple molding efficiency, lower cost etc. But its mechanical properties are worse than thermosets.

Q. Using a long fiber reinforced thermoplastic material, will it block the die hole due to the long length of the fiber or not?

ج: عند استخدام ألياف زجاجية طويلة أو ألياف كربونية طويلة ، من الضروري تقييم ما إذا كان المنتج مناسبًا لـ LFT-G. إذا كان المنتج صغيرًا جدًا أو كان الاستغناء غير مناسب لمواد الألياف الطويلة. يحتوي الألياف الطويلة على متطلبات فوهة القالب.

س: كيف تختار طريقة التعزيز وطول المادة عند استخدام مادة لدن بالحرارة طويلة مقواة بالألياف؟

A. يعتمد اختيار المواد على متطلبات المنتجات. من الضروري تقييم مقدار تعزيز المحتوى ومقدار الطول الأكثر ملاءمة ، والذي يعتمد على متطلبات أداء المنتجات.

Xiamen LFT Composite Plastic Co.، Ltd.

---

سوف نقدم لكم

1. المعلمات التقنية للمواد LFT & LFRT والتصميم الرائد

2. قالب تصميم الجبهة والتوصيات

3. تقديم الدعم الفني مثل القولبة بالحقن والقولبة بالبثق