24 × 7 الخدمة عبر الإنترنت : +8613950095727

#البريد الإلكتروني
  • شارك :

  • in
  • https://www.facebook.com/profile.php?id=100031871989158
  • g
  • y
  • t
منتجات
الصفحة الرئيسية /

البوليمر الألياف الزجاجية طويلة

/

نايلون من البولي أميد المقوى بالألياف الزجاجية الطويلة PA66

/Xiamen Lft Polyamide6 طويل من الألياف الزجاجية المقواة بالبلاستيك عالي الصلابة وخفيف الوزن 12 مم
الاقسام

Xiamen Lft Polyamide6 طويل من الألياف الزجاجية المقواة بالبلاستيك عالي الصلابة وخفيف الوزن 12 مم

  • رقم الصنف.:

    PA66-NA-LGF40
  • دفع:

    T/T or L/C (other payment ways also can be di
  • أصل المنتج:

    Xiamen, China
  • اللون:

    Original color (also can be customized)
  • ميناء الشحن:

    Xiamen, China
التحقيق الآن
تفاصيل المنتج

PA66 filling LGF


Nylon (PA) has a series of excellent properties, such as high mechanical strength, chemical resistance, oil resistance, wear resistance, self-lubrication, easy processing and forming, and has become one of the thermoplastic engineering plastics widely used at home and abroad.


But in the practical application, the performance requirements of nylon are different under different conditions or environment.

For example, electric drill and motor shell, pump impeller, bearing, diesel engine and air conditioning fan and other parts require nylon material to have high strength, high rigidity and high dimensional stability; Because of the poor toughness of nylon at low temperature, it is necessary to toughen it. In some outdoor applications, nylon materials must be weather-resistant modification in long-term outdoor environment.

The reinforced materials used for nylon are mainly glass fiber, carbon fiber, whiskers and other fibrous materials, and the glass fiber reinforced is the most widely used. The glass fiber reinforcement can obviously improve the rigidity strength and hardness of the material, and the dimensional stability and heat resistance of the material are obviously improved.


Because nylon itself is not strong enough, by adding 10 to 30 percent of the fiber, to increase its strength. In particular, 30% strength is considered the most appropriate ratio. Also added to 40-50%, according to the specific requirements of different products, coupled with the appropriate formula, can be successful.




Production technology of glass fiber reinforced nylon


Long fiber method, that is, nylon and other components are premixed and added to the hopper, and the glass fiber from the glass fiber entrance through the screw rotation into the screw, and then mixed with nylon resin.


Factors affecting the properties of glass fiber reinforced nylon


Firstly, the interface bond between glass fiber and nylon resin has the most important effect on glass fiber reinforced nylon. If the combination between the two is not good, the reinforcement effect will be greatly reduced. At this time, the surface treatment of glass fiber is particularly important. Today, fiberglass manufacturers have been able to produce fiberglass models for different materials with different surface treatments for use by modified plastics manufacturers, as long as the right choice.

Second, the length of glass fiber in nylon material is another major factor affecting its properties. In general, long glass fibers are superior to short glass fibers in terms of tensile strength, bending strength and modulus, and notched impact strength.

At the same time, the dispersion of glass fiber in the material can not be ignored. The dispersion of glass fiber mainly depends on the appropriate shearing action of twin-screw and the kneading action of material, which involves the combination and speed of screw. The selection of screw speed is related to the content of additives such as glass fiber in the formula. For flame-retardant reinforced nylon, low speed is appropriate because the flame retardant has been decomposed by heat.

In addition, processing temperature, glass fiber diameter, glass fiber type will also affect the final performance of the material, so it will not be repeated here.


Glass fiber enhances the fluidity of nylon


The fluidity of glass fiber reinforced nylon is poor, and problems such as high injection pressure, high injection temperature, dissatisfaction with injection molding and poor surface quality are easy to occur in the process of injection molding, which seriously affect the appearance of products and lead to a high defect rate of products. Especially in the production process of injection molding products, and can not directly add lubricant to solve the problem, can only be improved on the raw material, generally speaking, this needs to be added in the modified formula lubrication componentS.



Resistance of glass fiber reinforced nylon to high temperature heat and oxygen aging


In some applications such as bearings and diesel fans, glass fiber reinforced nylon often faces the problem of long time high temperature thermal and oxygen aging. Although the reinforced modification of nylon with glass fiber can moderately improve the heat resistance of nylon, it can not solve the problem well. Better results can be achieved by adding appropriate anti-thermal oxygen aging additives to the glass fiber reinforced nylon composite material, as shown in the figure above.


Glass fiber enhances the weather resistance of nylon


Nylon under the influence of sunlight, temperature change, wind and rain and other external conditions, there will be a series of aging phenomena such as fading, discoloration, cracking, powder and strength reduction, among which UV is the key factor to promote aging. Weather resistant nylon is currently mainly black products, that is, by adding carbon black and other ultraviolet absorption additives in nylon to solve its weather resistance. But in addition to black products, natural or light colored nylon in outdoor application also often face the problem of aging, mainly manifested as yellow parts.



Application of nylon with different fiber ratio


Glass fiber with a proportion of 40-50% reinforced nylon material, mainly suitable for high strength gear, professional equipment of high strength parts manufacturing.


الألياف الزجاجية بنسبة 25-35 ٪ من مادة النايلون المقواة ، وهي مناسبة بشكل أساسي لقطع غيار السيارات ، وقذيفة الأدوات الكهربائية ، والشفرات الكهربائية ، وعجلات الرياح ، وأدوات المائدة ، ولعب الأطفال ، وتصنيع الأجزاء الأخرى ذات القوة المتوسطة.



ورقة البيانات


تم اختباره من قبل معملنا الخاص ، كمرجع فقط.



تفاصيل




ارسل رسالة

إذا كان لديك أي مشكلة عند استخدام الموقع أو منتجاتنا ، يرجى كتابة تعليقاتك أو اقتراحاتك ، وسوف نقوم بالرد على أسئلتك في أقرب وقت ممكن! شكرا لك على اهتمامك!

إذا كان لديك أسئلة أو اقتراحات ، فالرجاء ترك لنا رسالة ، وسوف نقوم بالرد عليك في أقرب وقت ممكن!

منتجات ذات صله
pa66 طويل من الألياف الزجاجية عززت مادة البولي أميد
الألياف الزجاجية طويلة عززت مادة البولي أميد (النايلون) pa66
و pa66 مع الألياف الزجاجية طويلة عززتهو درع المكونات الميكانيكية للصلابة العالية والاستقرار الأبعاد ، ويستخدم على نطاق واسع في الأجزاء الميكانيكية والكهربائية المستخدمة في الصناعة الكهربائية والإلكترونية.
pa66 طويل من الألياف الزجاجية عززت مادة البولي أميد
مادة البولي أميد (النايلون) pa66 المقوى بالألياف الزجاجية الطويلة
مادة البولي أميد (النايلون) pa66 المقوى بالألياف الزجاجية الطويلةهو درع مكون ميكانيكي للصلابة العالية والاستقرار الأبعاد ، ويستخدم على نطاق واسع في الأجزاء الميكانيكية والكهربائية المستخدمة في الصناعة الكهربائية والإلكترونية.
pa66 طويل من الألياف الزجاجية عززت مادة البولي أميد
عززت مادة البولي أميد (النايلون) الراتنج pa66 الألياف الزجاجية طويلة
عززت مادة البولي أميد (النايلون) الراتنج pa66 الألياف الزجاجية طويلةهو درع مكون ميكانيكي للصلابة العالية والاستقرار الأبعاد ، ويستخدم على نطاق واسع في الأجزاء الميكانيكية والكهربائية المستخدمة في الصناعة الكهربائية والإلكترونية.
مادة البولي أميد المقوى (النايلون) pa66 الألياف الزجاجية الطويلة
مادة البولي أميد الألياف الزجاجية البلاستيكية النايلون pa66
نايلون pa6 مادة البولي أميد طويل الألياف الزجاجية البلاستيكية المواد؛ راتنج nylon6 مع البلاستيك الألياف الزجاجية المركبة طويلة.
ألياف زجاجية طويلة pa66 إعادة التدوير المقوى pa6  pa66 حبيبات
نايلون بولي أميد مقوى بألياف زجاجية طويلة pa66 عذراء pa6 حبيبات لدن بالحرارة
قالب حقن وبثق ألياف زجاجية طويلة pa66 إعادة التدوير المقوى pa6 pa66 حبيبات
الصين oem pa66 lgf40 المواد pa66 المورد
pa66 lgf40 المواد pa66
abs v0 المواد الخام البلاستيكية abs حبيبات البوليمر lgf40 أي واحد مصنوع في مصنع بنفسي.
الصين oem pp البولي بروبلين حقن صب البولي بروبلين السعر المورد
pp البولي بروبلين حقن صب البولي بروبلين السعر
pp polypropylene injection molding polypropylene price which one is made in ourself factory.The production is very cheap.
الصين oem النايلون 6 الألياف الزجاجية حبيبات pa66 الكريات إعادة تدوير المواد المورد
النايلون 6 الألياف الزجاجية حبيبات pa66 الكريات إعادة تدوير المواد
النايلون 6 الألياف الزجاجية حبيبات pa66 الكريات إعادة تدوير مواد واحد مصنوع في المصنع.
النشرة الإخبارية

-- الحصول على التحديثات مع أحدث المواضيع

حقوق النشر © 2015-2024 Xiamen LFT composite plastic Co.,ltd..كل الحقوق محفوظة.

الصفحة الرئيسية

منتجات

 أخبار

اتصل